Jan 11, 2019 WinTV v7.2 with Extend The new TV application from Hauppauge Now with video streaming support for the iPad, iPhone, iPod touch, Apple Mac and Windows 7 based PCs. Normalhorsehunter 2019-01-11 01:05 Wintv V8 With Extend Iso. Jun 25, 2018 Wintv V7.2 With Wintv Extend Iso Rating: 3,6/5 2254 votes Hauppauge WinTV v7.2.28147 w Extend WinTV v7.2 is only available from the Hauppauge webstore at a cost of $9.95 (plus shipping). Prabhu Nepal Tamil Serials List there.
WinTV Extend is a Internet video server application built into the WinTV v7.2 application. WinTV Extend runs on Windows based PCs (it currently does not run on a Mac, though TV from WinTV Extend can be watched on a Mac). File Name: wintv7cd2.4d.exe; Author: Hauppauge Computer Works, Inc. Is an internet video streaming application built into some versions.you can order it from.wintv extend, when used to send video.if you have a wintv v7.2 cd rom with extend, then the latest version of wintv extend will also be installed.se avete acquistato una copia di wintv v7.2.wintv extend enables you to stream live tv and recordings from your pc at home to your ios.find hauppauge wintv 7 and double. WinTV v7.2 with Extend Live TV streaming from your PC to your iPhone or iPad. WinTV Extend is a built-in Internet video server for the WinTV v7.2 application. WinTV Extend will take your live TV signal and send it to your iPhone, iPad, iPod touch, Mac or PC computer over either a.
WinTV v8 application and TV tuner driver download package
Hauppauge WinTV 7 HD 7 55. Serialkey preview: Z6321-03150-GRAYM-574. Added: Downloaded. Please input captcha to take your serial number.
This is WinTV v8, which can be used if you have a WinTV v7 CD-ROM. If you have a WinTV v8 Activation Code, you can upgrade to WinTV v8.5 at no cost.
Installation notes for WinTV v8:
WinTV v8 is primarily for the Hauppauge WinTV-HVR-850, WinTV-HVR-950, Colossus (not Colossus 2), HD PVR model 1212, WinTV-HVR-1150, WinTV-HVR-1500 or WinTV-HVR-1600. WinTV v8.5 does not support these products.
Activation for this version of WinTV v8 is done with your WinTV v7 CD-ROM or WinTV v8.5 Activation Code.
You can purchase a new WinTV v8.5 Activation Code on the Hauppauge webstore for $9.95. This can then be used to activate WinTV v8.
WinTV v8 installer For Windows 10, 8, and 7
File name: wintv8setup_35166.exe File size: 108 MB Date: June 22, 2017 Release notes Backup download site
This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v8 application and utilities.
To install the WinTV v8 application
Download the WinTV v8 installer to your PC. After downloading this file, it's normally saved in the Download directory on your PC Note: If you see a message Run or Save?, click Save.
Have your WinTV Activation Code ready or insert your original valid WinTV v7 CD
Run wintv8setup from the Download directory on your PC
At Activation required, click Check WinTV CD if you have a WinTV v7 CD or click Enter Serial Number and then enter your WinTV Activation code.
This will complete the driver and application installation for your WinTV.
Wintv V7.2 With Wintv Extend Iso Free
To install WinTV v8 on a PC or laptop without a CD-ROM drive
If your PC or laptop does not have a CD-ROM drive, do the following:
At the conclusion of the installation a dialog box will pop up saying 'Activation required'
Click Enter Product Code
You will find the Product code on your WinTV v7 Installation CD
Enter the Product code including dashes and dots
To find your Product Code
Look at the following guide for finding your product code
Note: If you have a WinTV v7.2 CD-ROM with Extend, the latest version of WinTV v8 with Extend will also be installed.
WinTV v8.5 application and TV tuner driver download package
Embird embroidery software crack. WinTV v8.5 is the latest version of the WinTV v8 application for Windows. This download is a complete WinTV v8.5 installation package, including drivers for supported WinTV products plus utilities.
Installation notes for WinTV v8.5:
If you have a Hauppauge WinTV-HVR-850, WinTV-HVR-950 (not the WinTV-HVR-950Q), Colossus (not Colossus 2) or HD PVR model 1212, you MUST use WinTV v8. WinTV v8.5 does not support these products.
A WinTV v8.5 Activation Code will be needed to install this WinTV v8.5 version.
If you do not have an Activation Code , but you have a WinTV v7 CD, you can install the WinTV v8 application (look in the WinTV 8 Download tab).
If you do not have either an Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8.5 Activation Code on the Hauppauge webstore for $9.95 or $11.95. This can then be used to activate WinTV v8.5 (or WinTV v8).
If you have a WinTV v8 Activation Code for Extend, the latest version of WinTV v8.5 with Extend will also be installed.
WinTV v8.5 installer For Windows 10, 8, and 7
Version: 37122 File size: 101 MB Date: May 2, 2019 Release notes Backup download site Previous version
To install the WinTV v8.5 application
Note: You will need to have your WinTV v8.5 Activation Code to complete this installation. If you do not have a WinTV v8.5 Activation Code, you can either buy one on the Hauppauge webstore for $9.95, or if you have a WinTV v7 CD, you can download and install the latest version of WinTV v8.
Download the WinTV v8.5 installer. After downloading this file, it's normally saved in the Download directory on your PC
Run wintv85setup from the Download directory on your PC. Halfway through the installation, a message will pop up asking for you to enter the Activation Code.
At the Activation required screen, click on Enter Activation code and enter the activation code which was emailed to you, is printed on the WinTV v8 activation card or printed on your WinTV v8 CD. You do not need to enter the dashes, and you can use upper or lower case characters.
When the installation is complete, you will find the WinTV icon on your Windows desktop. Double click on this icon and the WinTV application will run. On the first run of WinTV, it will automatically go through the TV source selection and will scan for channels.
Keyboard Control in WinTV
Next Channel Plus (+)
Previous Channel Minus (-)
Increase Audio Volume 'Page Up'
Decrease Audio Volume 'Page Down'
Mute 'Ctrl + M'
Enter Preset Number '0 - 9'
Show Channel List 'Ctrl + L'
Make Snapshot 'Space Bar'
Show Now/Next 'Ctrl + O'
Display Stream Details 'Ctrl + D'
Subtitles on / off 'Ctrl + S'
Change Aspect Ratio 'Ctrl + A'
Pause Live TV 'Ctrl + Q'
Continue Live TV 'Alt + P'
Skip Ahead 'Ctrl + F'
Skip Back 'Ctrl + R'
Jump to Live Position 'Ctrl + C'
Full Screen 'Ctrl + W'
Exit Full Screen 'Esc'
Start TV 'Alt + T'
Start Recording 'Alt + R'
Stop Recording / Playback 'Alt + S'
Open File for Playback 'Alt + F'
Open WinTV Settings Dialog 'Ctrl + I'
Exit Application 'Alt + F4'
Where can I find the manual for WinTV?
In WinTV v8, right click your mouse in the live TV window, and go to Help. You will see our online manual.
You can also find the manual on our website in the Support -> WinTV v8 under the Manuals tab.
What do I need to upgrade the WinTV application from the Hauppauge website?
In order to upgrade to WinTV v8.5, you must have your WinTV v8 Activation Code. If you do not have an Activation Code , but you have a WinTV v7 CD, you can install the WinTV v8 application (look in the Support -> WinTV 8 Download tab). If you do not have either a WinTV v8 Activation Code or your original WinTV v7 CD-ROM, you can purchase a new WinTV v8 Activation Code on the Hauppauge webstore for $9.95. The WinTV v8 Activation Code can then be used to activate WinTV v8.5
How do I rescan channels?
In WinTV v8, click on the setting button (Gear) in the lower left of the application. Then click on the Devices tab and highlight your WinTV device and click Tuner Setup (see the first picture below).
In the Device Setup Wizard, you will see a list of TV formats which your Hauppauge TV tuner can support. Depending upon which Hauppauge tuner you have, you will have a choice of analog, digital or external inputs (see the second picture below). You can also select all formats and let the WinTV application show you what it finds in each format (if anything).
Click Next and Next and let WinTV scan for channels. The results should look like picture 3 below.
Settings -> Devices
click to enlarge
Device Setup Wizard
click to enlarge
Scan Complete
click to enlarge
I selected a channel but I just see 'buffering' in WinTV. Also there is no TV, just a blank screen
Buffering and no TV video can be caused by a few things:
If there is a problem with your TV signal. Check your antenna or coax cable going to the Hauppauge product.
If your anti virus software is preventing the WinTV application from making a temporary video buffer. If this is the case, you'll need to either disable the anti-virus software or create an exception for the WinTV application in your anti-virus exception list.
If you using a cable TV or satellite box, make sure the box is turned on.
I scanned for channels, and some were found, yet I do not see any channels listed in WinTV's channel list. What did I do wrong?
If you see channels during the scan, but no channels are listed in WinTV channel list (to see the channel list, right click your mouse on the live TV window, then select Find Channel), then something went wrong in the WinTV TV channel database.
Solution:
Uninstall WinTV completely: go to start/control panel/ and look for Program and feature and uninstall Hauppauge WinTV.
After that please restart the computer.
When the system comes back up please browse to the following folders and if you see a WinTV folder, delete the folder.
C:UsersPublic
C:Program Files or Program Files (x86)
Also please go to this folder which is a hidden folder and delete the Hauppauge folder: C:ProgramData Information on how to show hidden folders in Windows: Show Hidden Files and Folders in Windows 7, 8.x, 10, or Vista http://www.howtogeek.com/howto/windows-vista/show-hidden-files-and-folders-in-windows-vista/
Once you do this you can reinstall Hauppauge WinTV with latest version from website.
Now if you scan for channels, you should see them in the WinTV application.
Our local TV channel switched frequencies today. I've been unable to get the rescan to work. I can find all the channels on the rescan but can't seem to save them in the database.
We recommend that you delete the WinTV channel database before you re-scan for channels, especially if you think that your channel line up has changed. To do this, close the WinTV v8/v8.5 application and then run this program: c:Program Files (x86)WinTVWinTV8WinTV8.exe -emptydb
I'm trying to schedule a recording with TitanTV, but the scheduled recording does not show up in the WinTV Scheduler
The channel list in TitanTV must match the channel list in WinTV. If, for example, you scanned WinTV with an over-the-air antenna but selected a cable TV line up in TitanTV, your channel line will be different and scheduled recordings will fail.
To understand why this happens, lets look at how the process of clicking the record button in TitanTV and how this turns into a WinTV Scheduled recording. When you click the red 'record' button in TitanTV, Titan delivers a .tvpi file to your PC which contains the details of the recording (channel number, channel name, time, date, etc.). But if the channel number doesn't match a channel which WinTV can tune to, WinTV ignores this attempt to schedule the recording and you will not see this scheduled item in the WinTV Scheduler.
There is a log file saved at c:userspublichauppauge wintvlogswintvtvpi.txt which shows the details of an attempt to schedule a TitanTV recording. Click here to see a sample of this information.
How can I save my WinTV Channels database?
To avoid having to rescan for TV channels, you can save the list of channels you are using. This is called Saving the WinTV Channels database.
To save your channel database go to:
C:UsersPublicWinTVChannel Database (Windows 7 and Vista)
C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)
Copy the hcwChanDB_5 file to a place for safe keeping. To replace saved Channels just copy HcwChanDB_5 back to Channel Database Dir.
How can I reorder or change the channel numbers in WinTV?
Open the Settings menu in WinTV v8 by clicking on the “gear” button in the lower left hand corner of the WinTV application. Then click on the “All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.
Example: You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:
click your right mouse button on 2704 in the All Channel list
change the Preset to 702
change the Name of the the channel to WNBC
Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.
Where can I find my recorded files?
The default directory for recorded files is:
C:UsersPublicVideos
You can change the default directory in WinTV v8 by clicking on the “gear” button, then the Capture tab. Here you will see the Recordings Directory.
In Windows XP, files are recorded to:
C:Documents and SettingsAll UsersShared DocumentsMy Videos
Can I record TV shows with subtitles or closed caption?
Yes. If the program you are watching has subtitles when you record you will also get the subtitles as part of the recording. When playing back recorded files in WinTV v8, you can use settings menu to turn the subtitles on or off. ( recorded sub titles can only be seen when using the WinTV v8 application for playback.)
Can I view and record my game play from external game sources with WinTV?
Yes, as long as you can connect the game system to either S-Video or composite video on your WinTV product. If so equipped, you can view and record the game action using the WinTV application software. For close to real time video, and to eliminate the normal delay, go to Settings/Advanced options and put a check mark in Game mode. Restart the WinTV application for the change to take effect.
WinTV v8 Installation Problems
Some virus software will prevent the WinTV application from completing the installation. If you find this, you will need to temporarily disable the virus sofware.
Here are a couple of virus applications and how to disable them:
AVG: 1) Right-click the AVG icon in the system tray next to the clock. 2) Click Temporarily disable AVG protection. 3) Choose how long you want the protection to be disabled and whether to disable the Firewall as well 4) then click OK.
I am getting a black screen in WinTV, or I'm seeing choppy video images. What can cause this?
There are two main reasons why you might see a black window:
TV Signal strength:. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.
Graphic display adapter related: The video graphics acceleration mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in “Use hardware acceleration when possible”.
If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).
What video format will WinTV record in?
There are two types of recordings WinTV v8 will make: recordings from digital TV and recordings from analog TV.
Recordings from digital TV (ATSC, DVB or QAM) stay in the original digital TV format and in the original video quality. WinTV will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV Configuration menu.
When recording from analog TV (NTSC or PAL), recordings are made using MPEG2. You can choose the quality of your analog recordings in the Settings menu under Capture and then Default Analog Recording Quality.
What software can I use to edit & burn the recorded files from WinTV?
When recording digital TV, all recordings are made in whatever format your digital TV is being transmitted in. For example, ATSC is transmitted as MPEG-2 and therefore WinTV recordings will be MPEG-2. The files will be .TS files.
When recording from analog video or analog TV, WinTV will record MPEG-2 video using a .TS format. To edit your videos, you can use any software editor that can work with .TS files or MPEG-2 files
What file size will the recorded videos be?
Digital Broadcasts (ATSC or QAM)
The file size of a digital signal capture depends on the bitrate of the digital signal. The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for ATSC & QAM recordings range from approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.
Analog TV or analog video
The WinTV application converts analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:
How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV?
On those WinTV products with FM radio, you can scan for FM radio channels:
click the Setup button (gear button) on the lower left hand side of the WinTV app
click the Device tab
Choose your WinTV product, and then click Tuner setup
you should see a list of video and audio sourcs available on your Hauppauge TV tuner. Click Analog FM Radio and then Next
under Stations, select either Automatic Scan if you want the WinTV application to scan for FM radio stations, or Manual Entry if you want to enter your FM radio stations one at a time
then click Next to start the FM radio scan
the scan is complete when the message Scan complete is displayed
click Next and Next and you will be back to the main WinTV application
to select your FM radio channel, right click your mouse in the TV window and select Find Channel. You will see your FM radio channels at the end of your channel list.
How can I see the WinTV v8 channel list all the time?
You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v8 window to bring up Find channel. You will see the Channel list (see picture below).
In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v8 window.
Keyboard shortcuts
Ctrl A Aspect ratio Ctrl D Display the video and audio format of the TV program Ctrl F Freeze the video Ctrl Z Open TV Scheduler Ctrl O View program details (digital TV program, where provided in the broadcast) Ctrl S Display subtitles Ctrl W Full screen toggle Alt F Open File menu for playback Alt M Open the Task Menu Alt P Previous channel Ctrl Q Pause Ctrl P Play Alt R Record Alt S Stop Alt T Start TV Ctrl C Catch up Ctrl > Skip ahead Ctrl < Skip back
Problems running the WinTV application on Windows Server
If you want to use WinTV on your Windows Server, you may encounter the problem that it won’t recognize any of your DVB devices. This is because there is no BDA support (Broadcast Driver Architecture) on Windows Server 2008 / 2012. So if you want to use BDA based hardware (i.e. DVB TV cards) it is neccessary to add BDA harware support manually.
To fix, see these instructions: https://marcowuen.wordpress.com/2012/08/13/howto-add-bda-hardware-support-to-windows-server-2008-r2/
Thread Tools
post #1 of 25Old11-21-2009, 03:52 PM - Thread Starter
Posts: 39
Liked: 10
If you've recently purchased a TV QAM tuner from Hauppauge and it came with a CD containing drivers and apps, do not throw it away thinking you can get the latest from their website. I recently had a mega clear out of all sorts of old CD's including about a dozen Hauppauge CD's for the various Hauppauge HW I have owned or still use. Hauppauge in their 'wisdom' now require you to have the original CD available if you wish to upgrade to latest apps. So I was caught out ! If you don't have the CD they'll sell you a replacement :-( Along with others I posted my distaste at this policy on their UK support forum - but my post was deleted as were other peoples - seems Hauppauge doesn't want to listen or comment to their customers who pay their wages. This is a shame as I had recently been very impressed by their warranty service when one of my HVR-1600's started to fail. Any suggestions as to alternate vendors who don't have such a retarded policy re drivers and apps ?
Sharp LC-45GD7U plus a ton of other HTPC equipment :-)
Sponsored Links
AVS Forum Special Member
Tagged: 0 Thread(s)
you should have taken the hint and gone right to media center and bypassed wintv altogether..
post #3 of 25Old11-21-2009, 07:26 PM - Thread Starter
Posts: 39
Liked: 10
Hi Mike, True... I've been running Win 7 MCE under Win 7 beta, then RC and now bought a copy and it works great - no need for any Win TV [email protected] However the issue I have is with my other PC which runs XP for some legacy apps and from time to time I like to watch live TV on it using Win TV. I must have spent well over $1000 with Hauppauge on a bunch of their cards including a HD-PVR which is hooked up to my HTPC - now only to find I can't up grade my XP box unless I buy a new CD.
Sharp LC-45GD7U plus a ton of other HTPC equipment :-)
Sponsored Links
Member
Mentioned: 0 Post(s)
If you can find the WinTV v7 version 1.2a .. you can install that and then 1.2b. Luckily I still had 1.2a when I installed Win 7 and wanted WinTV installed (to help me figure out why I wasn't getting QAM)
post #5 of 25Old11-21-2009, 08:42 PM - Thread Starter
Posts: 39
Liked: 10
yep - that's what I had to do - found a version available on the web then upgraded to 1.2b. Going beyond 1.2b doesn't seem possible without an original disk. Just seems odd as the SW is so tied to the HW why would they need to enforce this original disk nonsense ? Maybe some to do with patents / licensing.
Sharp LC-45GD7U plus a ton of other HTPC equipment :-)
Wintv V7 Activation Code
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by jjkusaf1 If you can find the WinTV v7 version 1.2a .. you can install that and then 1.2b. Luckily I still had 1.2a when I installed Win 7 and wanted WinTV installed (to help me figure out why I wasn't getting QAM)
Do I an original disk NO You can downlaod one older CD Kit I have on shspvr just look on the forum Mainly this one http://www.shspvr.com/ftp/download/h..W4_8_26351PPH/ Burn CD label as HCW4_8_26351PPH Point the the new WinTV installer to the CD drive
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by timdf If you've recently purchased a TV QAM tuner from Hauppauge and it came with a CD containing drivers and apps, do not throw it away thinking you can get the latest from their website. I recently had a mega clear out of all sorts of old CD's including about a dozen Hauppauge CD's for the various Hauppauge HW I have owned or still use. Hauppauge in their 'wisdom' now require you to have the original CD available if you wish to upgrade to latest apps. So I was caught out ! If you don't have the CD they'll sell you a replacement :-( Along with others I posted my distaste at this policy on their UK support forum - but my post was deleted as were other peoples - seems Hauppauge doesn't want to listen or comment to their customers who pay their wages. This is a shame as I had recently been very impressed by their warranty service when one of my HVR-1600's started to fail. Any suggestions as to alternate vendors who don't have such a retarded policy re drivers and apps ?
If have a Hauppauge CD just point it to the CD as long is fair new one with ver 6 on it just beware there are two CD type one MCE ver which has no apps I all ready post this on shspvr forum. I just look on UK forum I see lot people other ask about it you may want look a round they may move it in to one of other post
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by mike_311 you should have taken the hint and gone right to media center and bypassed wintv altogether..
Not really in min way WinTV is very useful
Location: Louisville, KY
Quoted: 4 Post(s)
Quote:
Originally Posted by SHS Not really in min way WinTV is very useful
Not to mention that WinTV 7 is an entirely different animal from previous versions.
post #10 of 25Old11-21-2009, 10:16 PM - Thread Starter
Posts: 39
Hauppauge Wintv 7 Download
Liked: 10
Thanks for the tip / link- but there's a load of files there all about 34.8MB - would I need to download them all or just a certain one or two ? Tim Quote:
Originally Posted by SHS Do I an original disk NO You can downlaod one older CD Kit I have on shspvr just look on the forum Mainly this one http://www.shspvr.com/ftp/download/h..W4_8_26351PPH/ Burn CD label as HCW4_8_26351PPH Point the the new WinTV installer to the CD drive
Sharp LC-45GD7U plus a ton of other HTPC equipment :-)
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Quote:
Originally Posted by timdf Thanks for the tip / link- but there's a load of files there all about 34.8MB - would I need to download them all or just a certain one or two ? Tim
You need all 14 file it a full CD of ver 6
Posts: 1,647
Liked: 39
Quote:
yep - that's what I had to do - found a version available on the web then upgraded to 1.2b.
thats exactly what i had to do. i threw away the disk since it was an older version anyway. great thinking on hauppauge's end if you ask me..
Posts: 434
Liked: 16
Quote:
Originally Posted by mike_311 you should have taken the hint and gone right to media center and bypassed wintv altogether..
Wintv V7 Iso
If all they're doing is making it more difficult to install WinTV, they're doing the people a favor.
Posts: 8
Liked: 10
Quote:
Originally Posted by SHS Do I an original disk NO You can downlaod one older CD Kit I have on shspvr just look on the forum Mainly this one Burn CD label as HCW4_8_26351PPH Point the the new WinTV installer to the CD drive
OMG..you sir are an absolute life saver AND the links are still valid. Thank you. P.S. it seems that Hauppauge are still continuing this absurd policy until this very day
Posts: 1
Liked: 10
Quote:
Originally Posted by little.dread.1 OMG..you sir are an absolute life saver AND the links are still valid. Thank you. P.S. it seems that Hauppauge are still continuing this absurd policy until this very day
Still works to this day! Thanks!
Posts: 1
Liked: 10
Just an FYI -- Hauppauge goofballs still sticking with this stupid policy. However thanks to the post above everything still works great. Download the RARs and EXE self extractor. Extract to a folder. Build an ISO file with the contents of the folder OR Burn a CD with the contents of the folder. Either way make sure the label is HCW4_8_26351PPH Then insert or mount the disk to your drive and voila you can install WINTV 7 automatically!!!!!! And to the user above who dissed the Hauppauge units. These are perfect for extraction of rare video from a household PVR. Or just clips of anything standard TV.. Spring 2013 everything works great and it still doesn't matter if you lost your silly Hauppauge CD.. THANKS SHS THIS IS BY FAR THE BEST 10$ I HAVE EVER SAVED!!!!!
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Posts: 46
Liked: 12
3 cheers to SHS! It appears that wintv is the only program that will allow me to recognize the s-video input on my hauppauge. I could not install Wintv because I was missing the disc, but you my friend have saved me time and money. Thanks very much!
Posts: 1
Liked: 10
'I used the HVR 1300 and now its on Ebay. But i couldnt find the old WINTV6 Software i needed to install WINTV 7 and use all features. Of course i can view TV via WIN MEDIA or other software but its not enough. Perhaps somebody was in my rooms?! Noboys home!? 12 US$ is the price. Do you have a better solution for me?! Answers to: [email protected]
Hauppauge Wintv 7 Serial Number
Posts: 16
Liked: 10
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!
Sorry but I close down the web down some time ago.
Posts: 16
Liked: 10
Ah well, I'll keep looking. $10 isn't a lot.. it's the principal of it. Now a day, it's not enough to sell you a product, they have to try to screw you into paying for what you already have. This should be illegal. I mean, how would someone feel if they were sold a car, after a year they put sugar in their gas tank so they would buy a new one? How is this right?
Location: Vinita, Oklahoma
Quoted: 90 Post(s)
Ah well, I'll keep looking. $10 isn't a lot.. it's the principal of it. Now a day, it's not enough to sell you a product, they have to try to screw you into paying for what you already have. This should be illegal. I mean, how would someone feel if they were sold a car, after a year they put sugar in their gas tank so they would buy a new one? How is this right?
Give this a try just burn to CD which may still work with WinTV 7 upgrade it not for WinTV 8 upgrading
This link is dead. Can someone send me a new link? Not one of those 'complete a survey' or 'download a virus' please. Just tried one on my machine that runs on a RAM drive (like a reinstall every time it boots). I have an FTP to upload it to, drop box or onedrive works too. I'd sure appreciate it. Thanks!
Hauppauge Wintv 7 Serial Number
Sorry but I close down the web down some time ago.
I still have the ISO (using the hauppauge on both linux and windows after so many years and i don't feel the need to buy a new one). Here's a new mirror (remove white spaces):
Posts: 16
Liked: 10
Thanks for the ISO. I already bought a CD and code, but can use it for the next computer for sure. I finally decided it was worth $10, since Windows 10 doesn't come with Media Center, and there were features in WinTV 8 that I found most useful (like streaming), not just a viewer and the driver. Since I could get the driver for free, no hard feelings towards Hauppauge. Considering how much I paid for the card ($3.99) I'm quite content If you need help getting into your TV service menu or anything, I'll return the favor. I built an IR receiver / decoder / transmitter out of an Arduino, an IR photo sensor and LED. Hooks up to the USB to a serial console, working on my remote program. I like this card, Windows 10 doesn't bitch as much as with my TV Wonder 650 (Got a USB, a PCI, and a PCIe), but it's got hardware encoding which is nice. They stopped supporting it at Vista, and you gotta 'Mickey-mouse' it to work with 10. Anyone have any ideas?
Sponsored Links
ReplyHome Theater Computers
Posting Rules
You may not edit your posts
HTML code is Off
view our sponsors showcase AVS Forum is proudly sponsored by
For the best viewing experience please update your browser to Google Chrome
We use cookies to improve your experience on this website and so that ads you see online can be tailored to your online browsing interests. We use data about you for a number of purposes explained in the links below. By continuing to browse our site you agree to our use of data and cookies. Tell me more Cookie Preferences
TV applications
WinTV v7
Live TV on your PC, in a window or full screen!
WinTV v7 ... TV in a window or full screen
click to enlarge the image
How do we make the world’s best and most reliable TV tuner hardware for PC’s even better for our customers? By giving it brilliant new software.
As we move from the age of analogue to digital and now high definition TV broadcasts, it leaves us all having to upgrade our TV set’s and set top boxes in order to keep up to date. Well here at Hauppauge we have had to do the same, while all our digital hardware has been able to receive HD broadcasts for some time, our software unfortunately hasn’t. So we took the opportunity to not only add HD capability, but completely redesign our software from scratch.
The result is our new WinTV 7 application, featuring:
A new, clear and intuitive interface
Single configuration and scanning pop up menu
High Definition TV and video support (selected models)
Integrated Scheduler/TV Guide
Integrated Teletext (where supported)
Instant time shift and recording
Multiple tuner support
Built-in video player, which supports a wide variety of video formats
Logical channel numbers
Signal strength monitor
Hauppauge Wintv V7 Download
In addition WinTV v7 now also supports the following other languages:
English
Chinese - Simplified
Chinese - Traditional
Czech
Danish
Dutch
Finnish
French
German
Greek
Italian
Japanese
Norwegian
Polish
Spanish
Swedish
Live TV streaming from your PC to your iPhone or iPad
WinTV Extend is a built-in Internet video server for the WinTV v7.2 application. WinTV Extend will take your live TV signal and send it to your iPhone, iPad, iPod touch, Mac or PC computer over either a home WiFi connection or over the Internet*.
WinTV v7.2 is available from the Hauppauge webstore as part of the WinTV HD CD. You can order it from our webstore.
All you need on your iPhone/iPad/iPod touch is a Safari browser pointed to your PC at home**. If you are using a Mac or a PC, all you need is a browser (Safari recommended on the Mac) and a Flash video player.
Extend running on the iPhone and iPad - screen shots
Here are some screen shots of an iPhone receiving video from WinTV Extend. The iPhone pictures show the TV control overlay with Pause and 30 second replay.
Notes:
* WinTV Extend will attempt to scale the video stream depending on bandwidth available, streaming via mobile internet is subject to phone reception and may incur high usage on your phones data tariff, please check with your mobile provider about cost and availability of this service.
** You will need to know the IP address of your computer and your home router/firewall will need to be configured to allow a direct connection.
Basic control of WinTV v7:
To remove the TV tools (called 'No Title mode'), double click your LEFT mouse button in the live TV.
Window,to Watch TV full screen double click again, to exit full screen hit the ESC key. You can also change the viewing modes from a drop down menu by a right click in the live TV window.
Changing TV channels: Click Channel Up or Channel down. Or RIGHT click in the live TV window to the drop down menu and go to channels which will display the current TV channel list for fast channel changing. You can also change channels by using the numbers on the keyboard or by pressing the letter on the keyboard for the channel name that you want to view.
Record TV: click the red Record button to start recording.. When you are finished recording, click the stop button then click the TV button to return to live TV. You can automatically schedule a recording by using the Hauppauge WinTV Scheduler and Guide.
Playback: Click the folder button to open your video folder to select the file for playback.
Audio setting: RIGHT click the mouse button on the 'audio stream' you can change the available audio language settings of the current TV program that you are watching.
Control menu: RIGHT click the mouse button in the TV window, the control options are displayed.
In order to re-size the window, move the mouse pointer to the edge of the TV window. This changes the mouse pointer into a double arrow. Press and hold the left hand mouse button and drag the window into the desired size, releasing the left mouse button when finished.
WinTV v7 application and driver download package
WinTV v7 application and TV tuner driver download package
Note: A valid WinTV application CD-ROM (WinTV v6 or WinTV v7) will be needed to install this WinTV v7 version
Any WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7 or WinTV v8, you can purchase a new CD on the Hauppauge webstore for $9.95
To install the WinTV v7 application update
Download the WinTV v7 installation package to your PC. After downloading this file, the file is normally saved in the Download directory on your PC
Insert your original valid WinTV CD in your CD-ROM drive
Run wintv7_cd from the Download directory on your PC
Download:
WinTV v7 installation package, version 3.9g For Windows 10, 8, 7, Vista and XP
This download is a complete installation package, including drivers for supported WinTV products plus the WinTV v7 application and utilities.
Installation notes:
A valid WinTV application CD-ROM will be needed to install this WinTV v7 version. Any WinTV v6 or WinTV 7 application CD can be used during the install. If you do not have your original WinTV CD-ROM but would like to update to WinTV v7, you can purchase a new CD on the Hauppauge webstore for $9.95
If you have a WinTV v7.2 CD-ROM with Extend, then the latest version of WinTV Extend will also be installed.
To install WinTV v7 on a PC or laptop without a CD-ROM drive
If your PC or laptop does not have a CD-ROM drive, do the following:
at the conclusion of the installation a dialog box will pop up saying 'Activation required'
Click Enter Product Code
You will find the Product code on your WinTV v7 Installation CD
Enter the Product code including dashes and dots
Release notes for WinTV v7 version 3.9G:
Update to the WinTV-HVR-955Q driver to fix problems seen when switching channels quickly
Fixed an error 'You do not have access to make the required system configuration modifications...'
Increased Pause Buffer bar size
Fixed TitanTV tvpi file association bug
New WinTV-NOVA-HD-USB 2 driver to fix issues in Turkey and other countries with low symbol rates
New WinTV-HVR-1975 driver to fix issues with 6875 Symbol rate
Fixed no Extend tab showing on upgrade installation
Where can I find the manual for WinTV 7?
Click on the [?] button in the upper right hand corner of the WinTV v7 application (near the 'x' which closes WinTV)
How do I install the WinTV 7 upgrade from the Hauppauge website?
In order to upgrade your present version of WinTV you need to have a Wintv 6 or Wintv 7 installation CD to validate the upgrade. After you download the update insert the WinTV CD in the CD Rom drive (if the CD autoruns and opens cancel the install.) then click on the WinTV 7 download to install.
How do I rescan channels?
Open WinTV 7 and click on the setting button (Gear) in the lower left of the application then click on the devices tab and highlight your Wintv device and click Tuner setup. Here you can choose from analog digital or external inputs, or all three.
How can I save my TV Channels database?
To save your channel database go to:
C:UsersPublicWinTVChannel Database (Windows 8, 7 and Vista)
C:Documents and SettingsAll UsersShared DocumentsWinTVChannel Database (Windows XP)
Copy the hcwChanDB_5 files to a place for safe keeping. To replace saved channels, just copy the HcwChanDB_5 files back into the Channel Database folder.
How can I reorder or change the channel numbers in WinTV v7?
Wintv Download Free
Open the Settings menu in WinTV v7 by clicking on the “gear” button in the lower left hand corner of the WinTV v7 application. Then click on the “All Channels' tab and right click on the channel you wish to edit. Click Details. Change the Preset number to the number you want. You can also change the channel Name.
Example: You will need to follow this procedure if you are scheduling recordings with Titan TV online program guide. For example, if you scan for TV channels in WinTV v7 and find that channel 2704 is WNBC but in the TitanTV electronic program guide WNBC is on channel 702, then do the following:
- click your right mouse button on 2704 in the All Channel list - change the Preset to 702 - change the Name of the the channel to WNBC
Then, when you select WNBC (channel 702) in TitanTV, it will tune to channel 2704, which is WNBC.
Where can I find my recorded files?
The default directory for recorded files is:
C:UsersPublicVideos
You can change the default directory by clicking on the Settings icon in WinTV 7 (the 'gear' icon on the lower left hand corner of the WinTV v7 app window), then the Capture tab. Here you will see the recording directory. You can click on Browse and pick a new directory.
In Windows XP, files are recorded to:
C:Documents and SettingsAll UsersShared DocumentsMy Videos
Can I record TV shows with subtitles or closed caption?
Yes. If the program you are watching has subtitles when you record you will also get the subtitles as part of the recording. When playing back recorded files in Wintv 7 you can use settings menu to turn the subtitles on or off. ( recorded sub titles can only be seen when using the wintv 7 application for playback.)
Can I view and record my game play from external game sources with WinTV?
Yes, as long as you can connect the game system to either S-Video or composite video on your WinTV product. If so equipped, you can view and record the game action using the WinTV application software. For close to real time video, and to eliminate the normal delay, go to Settings/Advanced options and put a check mark in Game mode. Restart the WinTV application for the change to take effect.
I am getting a black screen in WinTV v7, or I'm seeing choppy video images. What can cause this?
Signal strength. If the TV signal strength is on the edge of being too low, you might see either a black screen where the live TV picture should be, or your live TV picture might be choppy. Also, be sure that the incoming signal from your video source is working properly.
Wintv V7.2 With Wintv Extend Iso 64-bit
Graphic display adapter related. The video graphics accelartion mode can cause choppy live video or possibly cause a black screen where the live TV picture should be. To optimize the video graphics mode, in the WinTV v7 application go to Settings and look under Video Renderer. EVR is the default setting. Try VMR 7, VMR 9, or overlay for better results. You may also try placing a check mark in “Use hardware acceleration when possible”.
If there is still no improvement, enabling extended logging in WinTV and emailing the log files to tech support will help in troubleshooting the problem. (To obtain extended logs, first go to Settings/Advanced options. Enable extended logging, exit WinTV and reopen it for the change to take effect).
What video format will WinTV v7 record in?
WinTV 7 will save the recordings in a transport stream format (.TS extension). These files may be converted to MPEG2 using options in the WinTV v7 Configuration menu.
What software can I use to edit & burn the recorded files from WinTV v7?
You can use any software editor that can work with .TS files or MPEG-2 files. Here are a few examples.
Ulead DVD MovieFactory Womble MPEG-VCR ArcSoft Total Media Extreme VideoReDo TVSuite
What file size will the recorded videos be?
Digital Broadcasts (DVB-T, DVB-C, Freeview HD, etc.)
The file size of a digital signal capture depends on the bitrate of the digital signal. The bitrate is set by the broadcaster and cannot be user configured. Bitrates for digital signals can range anywhere from about 1.2 Mbits/sec up to 19.3 Mbits/sec. Most of the time these bitrates are variable and not constant. Capture sizes for ATSC & QAM recordings are approximately 1.7 Gigabytes per hour up to 8.3 Gigabytes per hour.
Analog Broadcasts
The WinTV application has to convert analog signals to digital in order to record. There are four recording profiles. The following list shows recording file sizes for burning to 4.3Gb DVD:
How do I scan for FM radio channels? And once I have scanned for FM radio, how do I find these radio stations in WinTV v7?
On those WinTV products with FM radio, you can scan for FM radio channels by clicking the Setup button (gear button) and then clicking on the Device tab. Choose your WinTV product, and then click Tuner setup. If your WinTV TV tuner supports FM radio reception, you should see 'FM radio' listed under the types of TV formats.
Then click Analog FM radio and then Scan.
Once you have scanned for and found FM radio stations, you can listen to FM radio in WinTV v7. To select a channel, Right Click on the live WinTV v7 window to bring up the Option menu, and then click Find channel. Your FM radio channels can be found at the bottom of the channel list.
How can I see the WinTV v7 channel list all the time?
You can display the TV and FM radio channel list all the time by Right Clicking on the live WinTV v7 window to bring up the Options menu, and then clicking Find channel. You will see the Channel list (see picture below).
In the upper right hand corner of the Channel list is a small 'pin' icon. Click this icon to 'pin' your channel list to the WinTV v7 window.
WinTV v7 Keyboard shortcuts
Ctrl A Aspect ratio Ctrl D Display the video and audio format of the TV program Ctrl F Freeze the video Ctrl Z Open TV Scheduler Ctrl O View program details (digital TV program, where provided in the broadcast) Ctrl S Display subtitles Ctrl W Full screen toggle Alt F Open File menu for playback Alt M Open the Task Menu Alt P Previous channel Ctrl Q Pause Ctrl P Play Alt R Record Alt S Stop Alt T Start TV Ctrl C Catch up Ctrl > Skip ahead Ctrl < Skip back
Works with multiple WinTV devices
WinTV v7 lets you control more than one WinTV device in your system.
Built in Channel Guide and recording Scheduler
WinTV v7 has an integrated Guide and scheduler to make your programming quick and easy! Just right click in the TV window for a drop down menu.
Monitor the signal you are receiving to allow you to improve aerial placement or correct signal problems on the fly!
WinTV v7 Monitor the signal you are receiving to allow you to improve aerial placement or correct signal problems on the fly!
Teletext overlay
Teletext on supported digital satellite channels can now be viewed within the WinTV v7 application overlaying the TV screen.
Support for multiple file formats
Play back different types of files through our WinTV v7 application, now not only can you play back the files you have recorded but you can open and watch other video files on your system making WinTV v7 a multi purpose application!
Support for new advanced digital TV standards, including high-definition H.264 channels